Refrigerant Suction, Pressurizing and Transfer Pumps (RTP)





to better allow the transfer of the refrigerant form a storage point (tank) to the end user, and to better guarantee the performances of the Refrigerant Charging station, FT has relevant pumps available.

These pumps are designed specifically for transfer and pressurization of refrigerants, and are provided with complete features and accessories, which include:

  • Pressure regulator fluid in the supply line
  • Gauge pressure of the fluid in the supply line
  • Safety valve by-pass to protect the RTP from possible over-pressure in the discharge line
  • Unit filter / dryer for compressed air

FT standard pumps can be adapted to each kind of productivity: from the low production to high production rate.

See the following table for main technical characteristics.

Maximum Rate6.0 L/min10.0 L/min13.0 L/min
Dimensions540x200x350 mm700x200x350 mm1,100x200x400 mm
Weight15 kg30 kg40 kg
Refrigerant Usedsecurity classification A1, A2 RTP6315, RTP6315T, RTP6325T; security classification A2L, A3 RTP6315-HC, RTP6315T-HC, RTP6325T-HC
Number of Cylinders12, double compression action2, double compression action
Geometric Compression Factor*4.27
Maximum Working Pressure4,000 kPa
Inlet Conncetion3/4" GAS-M
Outlet Connection3/8" GAS-M
Compressed Air Supply2 ÷ 6 bar Filtered, Not lubricated
Compressed Air ConnectionRILSAN Øe 8 mm
* Equal to the ratio:refrigerant delivery pressure–refrigerant supply pressure) / compressed air pressure.

Refrigerant Transfer Pumps Details

Click here to see the Refrigerant Transfer Pump details.


Accumulators Details

Click here to see the Accumulators details.

Tel. +39 0564 957385
VAT: IT 00871960522 • REA GR 85796

FT  S.r.l.  "Future Technologies"
Via delle Sorgenti, 5
58033 Castel del Piano GR ITALY